Premium Filaments
for 3D printing
Language EN
PL EN DE
Produced in Poland

The filament we produce -
from the formula to the spool

Premium 3D printing filaments from our facility in Poland. Choose the material and color, and you'll see exactly the spool you'll receive.

View filaments How we manufacture
01 What are you printing?
02 Material
03 Colour
+6
04 Spool
Not sure which material to choose? Choose the right one for your application ›
Selected LUME spool LUME PLA+

Colour Yellow

Reference RAL 9003

Transmission distance (TD) 4.5

HEX #F4F4F4

Diameter 1.75 mm ±0.02

Nozzle temp. 220–240 °C

Bed temp. 55–65 °C

Spool 1 kg

LUME PLA+ Product page
Made in Poland Our own plant, our own lines and control over every stage of production.
Quality in line with ISO 9001 Every spool is checked before packing - consistent quality in every batch.
Ø 1.75 mm ±0.02 Tolerance maintained throughout the entire batch.
Batch Traceability Batch number on the label.

The right material for every job

From a figurine for a shelf to a part that works in the sun and in the cold.

LUME PLA+ spool

LUME PLA+

The easiest to print, with no enclosure or adhesive, and the widest color range. For models, prototypes and decorations.

Ø 1.75 mm ±0.02 0,25 kg / 1 kg / 3 kg 30 colours nozzle temperature 220–240 °C table temperature 55–65 °C View product → LUME PET-G spool

LUME PET-G

It bends rather than breaks and withstands most chemicals. Good for housings, mounts and parts under load.

Ø 1.75 mm ±0.02 0,25 kg / 1 kg / 3 kg 30 colours nozzle temperature 240–260 °C table temperature 70–90 °C View product → LUME ABS+ High Speed spool

LUME ABS+ High Speed

It retains its dimensions at temperatures up to approximately 90 °C, and after printing, it can be sanded and glued. For technical applications.

Ø 1.75 mm ±0.02 0,2 kg / 0,85 kg 5 colours nozzle temperature 250–270 °C table temperature 90–110 °C View product → LUME ASA+ High Speed spool

LUME ASA+ High Speed

The only UV-resistant material in our lineup. For parts that are meant to last outdoors for more than one season.

Ø 1.75 mm ±0.02 0,2 kg / 0,85 kg 5 colours nozzle temperature 260–270 °C table temperature 90–110 °C View product →

The specifications and shades are provided for reference only - the binding specifications can be found in the material data sheets.

The same shade in every subsequent batch

Next to each color name, you’ll see the materials we use to produce it. We dye each material separately, so the same color in PLA+ and PET-G may look slightly different; the line next to the material indicates its shade. When you click on a color, you’ll see the HEX code, the light transmission distance (TD), and the closest RAL or Pantone match.

· 19 in several shades

The colors on the screen may differ from the actual colors. We determine custom colors for industrial customers on a case-by-case basis.

Check your spool's measurements by batch number

The batch number is on the spool label. Enter it to see the diameter profile along the whole spool, the spread and the ovality, measured on the production line.

LUME PET-G

Diameter 1.75 mm ±0.02

Net weight 1 kg

Batch number (LOT number) 0000000

Production date 00.00.0000

Made in Poland

Sample report

Batch 1176892 LUME PET-G Red · 1.75 mm · 1 kg

  • Index FIL10000139-WUN
  • Production date 27.11.2026
  • Status produced

Diameter profile along the winding modelled profile

1.77 1.76 1.75 1.74 1.73 upper tolerance +0.02 lower tolerance −0.02 highest point 1.764 lowest point 1.745 0% 25% 50% 75% 100% distribution 1.77 1.76 1.75 1.74 1.73 upper tolerance +0.02 lower tolerance −0.02 highest point 1.764 lowest point 1.745 0% 50% 100%
Filament cross-section
ovality 0.011 mm · exaggerated ×50
Mean diameter
1.751 mm
Max. deviation
± 0.014 mm
Ovality
0.011 mm
Net weight
coming soon
Length
coming soon

Not sure which material to choose?

Answer two questions, and we'll suggest a material, explain why you should choose it, and tell you what you'll be giving up by choosing it. Every filament has its limitations, and it's best to know them before you buy.

  1. Application
  2. Requirement
  3. Material

Where will the printout go?

What is most important?

A spool of the recommended filament

For this application, we use

LUME PLA+

What are you giving up?

Enclosed chamber Unnecessary Heat resistance up to approx. 55 °C Nozzle 220–240 °C Table 55–65 °C Drying Not required
View the material data sheet

Prints made with our filament

No retouching and no smoothing. We show the layer up close, because that's what you look at first.

Shown: 6 from 6

Structural print made of white PLA+
Structural panel PLA+ · white
Structural print made of turquoise-colored PET-G
Structural panel PET-G · turquoise
Structural print made of crimson-colored PLA+
Structural panel PLA+ · crimson
Structural print made of purple PET-G
Structural panel PET-G · purple
Gear ABS+ · black · design
External Bracket ASA · light gray · illustration

We manufacture the filament ourselves

We handle the formulation, extrusion, measurement, winding, and packaging all at a single facility, so we know exactly what goes into each spool. That’s why our name and batch number are printed on the label.

The entire process with us Five stages, all at our facility. Click on a stage to see what happens there and what we measure. from granules to a packaged spool

PELLETS EXTRUSION COOLING Ø 1,75 MEASUREMENT WINDING

Filament under your brand name

We manufacture filament under your brand: we work with you to determine the formulation, color, label, and packaging. You communicate directly with the facility that manufactures it.

Your part

  • our own product and our own brand
  • A wide range of colors and detailed specifications
  • custom packaging designs

Sample label

Our part

  • Consistency across successive batches, as certified by ISO 9001
  • mass production at a large facility, direct contact, fast and reliable supply chains
  • technical, technological, and logistical support
  • assistance with brand development
Let's Talk About OEM

All materials in a single table

The table helps you choose a material. Complete specifications for each material are provided in the technical data sheet (TDS).

Parameter PLA+PET-GABS+ASA+
Nozzle temperature 220–240 °C240–260 °C250–270 °C260–270 °C
Table temperature 55–65 °C70–90 °C90–110 °C90–110 °C
Cooling 90–100%40–90%10–40%10–70%
Density 1.24 g/cm³1.27 g/cm³1.04 g/cm³1.07 g/cm³
Difficulty of use lowaveragehighaverage
Strength averagehighhighhigh
Hardness highaverageaverageaverage
Flexibility lowaveragehighhigh
Maximum operating temperature ~50 °C~70 °C~90 °C~100 °C
UV resistance lowaveragelowhigh
Solvents nonenoneacetoneacetone
Biodegradability yes (under industrial conditions)nonono
Hygroscopicity lowhighlowaverage
Contraction lowlowtallaverage
Application decorative and display items, figurines, keychains, prototypesprototypes, functional components, mechanical parts, finished products, for outdoor usemechanical parts that require greater durability and flexibilitymechanical parts requiring greater durability and flexibility, for outdoor use

Technical data sheets, certificates, and printer profiles

Technical data sheet (TDS) - PLA+ PDF · 213.7 KB Technical data sheet (TDS) - PET-G PDF · 212.8 KB Technical data sheet (TDS) - ABS+ PDF · 217.8 KB Technical data sheet (TDS) - ASA+ PDF · 161.9 KB Safety data sheet (SDS) - PLA+ PDF · 331.8 KB Safety data sheet (SDS) - PET-G PDF · 308.2 KB Safety data sheet (SDS) - ABS+ PDF · 312.5 KB Safety data sheet (SDS) - ASA+ PDF · 215.9 KB Slicer profiles - all materials ZIP · 30.6 KB ISO 9001 certificate PDF · 222.1 KB REACH declaration of conformity PDF · 229.4 KB RoHS declaration of conformity PDF · 347.5 KB

Frequently Asked Questions

In our product line, PET-G and ASA absorb moisture the fastest, but no filament is immune to this phenomenon. A sign of moisture in the filament is the presence of air bubbles on the surface of the print. Such filament should be dried in a dedicated dryer at a temperature appropriate for that type of filament.

Store in a dry place at room temperature; it is best to avoid exposure to sunlight. To prevent the filament from becoming damp, it is a good idea to store it in an airtight container with a desiccant, which should be dried or replaced regularly.

The spool has standard external dimensions and a standard hole, so it works in typical feeders. A drawing with dimensions is on every color page, in the “Spool and packaging” section.

Yes, for industrial customers. The minimum order quantity and delivery time depend on the shade - we have the formula in-house, so we set these terms directly without intermediaries.

Are you looking for a material for a specific application or a wholesale supplier?

View filaments Let's talk about working together
Made in Poland

Let's talk about filament

We'll help you choose the right material, set up a wholesale partnership, or select a custom color. Call the appropriate person or contact us via the form.

Mateusz Przybyła
Sales in Poland, LUME Filaments
Phone:
+48 661 300 511
Email:
info@lumefilaments.eu
Market:
Poland
Tomasz Kroczek
Export Manager, LUME Filaments
Phone:
+48 661 300 507
Email:
tomasz.kroczek@lumefilaments.eu
Markets:
Australia, Austria, Cyprus, Denmark, Finland, Germany, Ireland, Japan, Liechtenstein, Luxembourg, Netherlands, New Zealand, North America, Norway, Philippines, Portugal, South America, South Korea, Spain, Sweden, Switzerland, Thailand, Vietnam
Ewelina Żmuda
Export Manager, LUME Filaments
Phone:
+48 531 192 590
Email:
ewelina.zmuda@lumefilaments.eu
Markets:
Albania, Armenia, Azerbaijan, Belarus, Bosnia and Herzegovina, Bulgaria, Croatia, Czechia, Estonia, Georgia, Greece, Hungary, Iceland, Kazakhstan, Kosovo, Kyrgyzstan, Latvia, Lithuania, Malta, Moldova, Mongolia, Montenegro, North Macedonia, Romania, Russia, Serbia, Slovakia, Slovenia, Tajikistan, Turkmenistan, Ukraine, Uzbekistan
Mateusz Olszowy
Export Sales Manager, LUME Filaments
Phone:
+48 539 953 709
Email:
mateusz.olszowy@lumefilaments.eu
Markets:
Afghanistan, Africa, Bangladesh, Belgium, France, India, Iran, Israel, Italy, Middle East, Nepal, Pakistan, Sri Lanka, Turkey, United Kingdom

Or write to us

Select a subject for your message. Are you asking about a specific spool? Please provide the lot number from the label.

For technical support and complaint handling, it streamlines verification by giving access to the measurement data from the production stage.

Data processing is described in Privacy Policy and the GDPR notice.